Description
This unit is an onboard charger, which means it is a charger that gets built into the vehicle or equipment and can also be incorporated into the dashboard and control systems.
The charger comes with an external charge status indicator on a 1.5m cable that can be installed into the dashboard for easy reference regarding the battery’s charge status.
The charger also comes with an interlock system, which is a safety system or locking system that prevents you from starting the vehicle / equipment as long as it is charging.
The charger is optimally adjusted for our Red Pole Energy range of Lithium batteries, but is also compatible with a wide range of batteries, simply check the charging specifications of the battery you want to charge.
Main Features
– Suitable for installation on vehicles
– Interlock safety system
– External charge status indicator (1.5m cable)
– Wide AC input voltage range (not sensitive to variations)
– Completely automatic battery charging: CC, CV and Floating
– Charger status LED : Red Flash (error), Red (charging), Yellow (almost full), Green (full)
– Charger waterproof rating: IP65 and Fan IP68
– Rugged aluminium body with integrated heatsink
– Input Connector: SA 3 point plug (2m cable)
– Output Connector: Red Anderson (50A)
Technical Specifications
– Input Voltage: 90 – 264 VAC
– Input Frequency: 50 Hz
– Input Current: < 4A
– Input Power Factor(Typ.) : ≥0.98 (Tested when the power is above half power)
– Efficiency: 93%
– No Load Power Consumption: <2W
– 3 Phase Charging: Pre-Charge, Constant Current, Constant Voltage
– Constant Voltage: 41.4 VDC (LiFePO4, 12s, Float Voltage)
– Output Connector: Red Anderson (50A)
– Output Power: 830 W Max
– Output Voltage: 41.4 VDC Max
– Output Current: 20 A Max
– Output Current Ripple: 500mAp-p Max
– Charger Waterproof Rating: IP65
– Fan Waterproof Rating: IP68
– Enclosure Material : Aluminium
– Dimensions: 158mm x 82mm x 289mm (WxHxL)
– Weight: 3.15kg
– Protection: Short Circuit, Over Voltage, Over-Temperature, Reverse Polarity
– Operating Temperature: -20 to 50 ºC
– Operating Humidity: Up to 100%
– MTBF: >100k hours
Standards
– Safety standards: EN60335, GB/T4706
– Withstand voltage: I/P-O/P: 2KVAC I/P-FG: 2KVAC O/P-FG: 2KVAC
– Isolation resistance: I/P-O/P, I/P-FG, O/P-FG: 100M ohms / 500VDC / 25ºC / 70%RH
– EMC emission: EN55022 Class A, GB/T 9254 Class A
– EMC immunity: EN 55024:2010, GB/T17618
– Vibration resistant: 10 ~ 500HZ, 2G 10 minutes/cycle, X, Y, Z axis each 60 minutes
Reviews
There are no reviews yet.